1. The amount of starting coating slurry is small, which is convenient for slurry formulation verification.

2. Special materials can be used to control the swelling of the proton membrane, and no other auxiliary materials are needed for direct coating.

3. The adsorption platform has a drying and heating function, which can be heated and dried during the coating process, and is compatible with infrared + hot air.

1.Special materials are used to control the swelling of proton membrane, with strong anti swelling ability, and the dry thickness range of coating is 2~20 μ m       

2.High machining accuracy of backing roll with a circular runout ≤ 1.5 μ m

3.The coated area rarely contacts the roller, reducing the risk of contamination

4.Optimize the production process, and anode coating is possible without additional process film, saving production and manufacturing costs

1.Special Reversing valve design, optimized head and tail influence area ≤ 5mm

2.The coated area rarely contacts the roller, reducing the risk of contamination

3.High machining accuracy of backing roll, circular runout ≤ 1.5 μ m

4.High oven temperature uniformity ≤± 2 ℃

1. Special reversing valve design, optimized head and tail influence area ≤ 5mm

2. The coated area has little contact with the roller, reducing the risk of contamination

3. The back roller has high machining accuracy, and the circular runout is less than or equal to 1.5μm

4. The oven temperature uniformity is high, ≤±2℃

1.Suitable for wide transfer printing, effective rolling width ≥ 400mm

2.Rolling speed 0.5-5m/min

3.It can adapt to intermittent transfer printing, and the straightness of product head and tail is high, ≤± 0.3mm