Applicable to the inspection of fuel cell MEA finished products, including size, appearance, thickness, air tightness, etc.

1.Detection accuracy: ± 0.8% of the reading+0.2% and measuring range.

2.Detection method: mass flow method.

Suitable for the preparation of electrolytic water slurry.

1.Size range of output slurry (d90): 5~20 μm (varies according to the solid content)

2.Mechanical slow mixing, high-speed shearing and ultrasonic dispersion three in one.

Be used for nanometer fine grinding for electrolytic water slurry.

1.Size range of output slurry (d90): 1~3 μm (varies according to the solid content)

2.Low slurry loss rate.

Applicable to integrated Machine for pre dispersion and nano fine grinding of catalyst slurry.

1.Integrated slurry tank and grinder, suitable for small batch preparation of electrolytic water catalyst. 

2.Optional 500ml dispersion cup, which can be combined with lifting platform for sample preparation. 

Suitable for small batch stack production

1.The six axis manipulator is used for stacking, and the membrane electrode and bipolar plate are automatically stacked with high flexibility.

2.Stacking accuracy ± 0.5mm (excluding material deviation).

Can clean the monopole plate and bipolar plate, and the Machine has the function of automatic detection of cleaning effect;

1.Production efficiency: 5~15min/basket.

2.Cleaning effect: the contact angle of 42 # dyne pen is about 60 °, and the conductivity at the end of pure water rinsing is less than 5 μs/cm.

Applicable to welding quality inspection, air tightness inspection and defect inspection of bipolar plate surface

1.Adopt mass flow method, test the external leakage and mutual leakage of the three cavities of the electrode plate,High precision and Fast .

2.Reliable detection, 1% wrong killing.

CCM and frame roll to roll continuous fit

1.Roll to roll continuous fit,High production capacity.

2.Online preparation of frame, no need to cut the border in advance.

Punch the frame and remove the waste.

1.Cutting accuracy  ≤±0.1mm

2.The mold accuracy  ±0.05mm

3.Thickness of SG incoming material  35-100um

Take the GDL sheet or coil stock into specified size.

1.Cutting accuracy  ≤±0.1mm

2.The mold accuracy  ±0.05mm

3.GDL incoming material thickness  120-280um